MAX 4200PSI Gas Pressure Washer, 2.6GPM 208CC Gas Pressure Washer, 7.0HP Engine
About Our Gasoline Cleaning Machines. : This gas pressure washer has a maximum pressure of 4200PSI. It is a perfect gasoline pressure washer with strong cleaning power. It is suitable for cleaning all kinds of dirt, moss and other stains. It is suitable for decks, walls, cars, fences, roofs, etc. Nozzles at different angles provide different water pressure.
: This gas power can provide up to 2.6GPM water output when using a foam nozzle, which is suitable for flushing vehicles and other items after cleaning. When used in combination with a soap bottle, the foam can be richer and the foam can cover a wider area, saving more time in your cleaning work.): This pressure washer is equipped with 3 quick-connect nozzles: 0°, 25° and soap nozzles. Different nozzles are suitable for different occasions, you can choose the appropriate nozzle according to your needs. : This power washer gas powered is equipped with 28-inches large movable wheels, which can adapt to various road surfaces and is easy to move.
At the same time, the 25FT high-pressure hose allows you to use it in a large cleaning range. : This power washer adopts a brand-new gasoline-powered mode, getting rid of the limitations of traditional wires and can be used anywhere outdoors. It has more powerful cleaning capabilities and better cleaning effects. It is an ideal choice for household cleaning.
3 Quick-Connect Nozzles: equipped with 3 quick-connect nozzles, which can provide different water pressure modes to meet different cleaning needs. 208CC Gas Engine: equipped with 208CC Gas Engine, which makes the water pressure stronger and improves the cleaning ability of the gas pressure washer. 2 Movable Wheels: equipped with 2 large removable wheels, allowing you to easily move the power washer to where you want to clean, making your cleaning work easier.25Ft High Pressure Hose: equipped with a 25FT high-pressure hose, which allows you to clean a larger area and reduce the frequency of moving the power washer. Alloy material: made of excellent alloy material, it has good durability and can be used for a longer period of time.
Gas Powered - Can be used anywhere. Heavy-duty maintenance-free axial cam (Including Thermal Relief Valve). Inlet N 3/4, Discharge M22X1.5. Different Angles of 3 Replaceable Nozzles.There are 0°, 25° and soap nozzles, different angles are suitable for different cleaning occasions. 0° (red): thin and powerful stream of water for difficult stains and debris removal. 25° (green): medium-angled spray for detailed cleaning. Detergent (black): this nozzle must be used together with a cleaning detergent at a low pressure. Use only this nozzle when using a detergent.
How to use foam nozzle and detergent tank: Pour detergent into the detergent tank; The liquid detergent will be mixed with water automatically, and discharged through the detergent nozzle at a low pressure; Allow detergent to remain on the surface for a short time before rinsing. Do not allow detergent to dry on the surface; Rinse with clean water under high pressure. Suyncll GAS Pressure Washer Has Powerful Cleaning Effect.
MAX 4200PSI Gas Pressure Washer: Delivering up to 4200 PSI of water pressure, this power washer is easy to use. Maximum 2.6GPM flow rate: It can provide a maximum flow rate of 2.6GPM and is equipped with a 1L soap bottle, suitable for cleaning the yard, cleaning the driveway, cleaning the deck, etc. 3 replaceable nozzles: Equipped with 3 quick-connect nozzles, 0°, 25° and soap nozzles, with different angles suitable for different cleaning situations. Large 8-inch diameter wheels: can adapt to various road conditions and move this gasoline cleaning machine anywhere you want. 25FT high-pressure hose: Equipped with a 25FT high-pressure hose, you can clean a large area without moving the gasoline cleaning machine.
Gasoline-powered mode: No wires are required, and it can be moved and used anywhere as long as the water source is connected and gasoline is installed, cleaning work can be performed normally. Excellent Cleaning Results - Can be Moved Anywhere. About Adding Oil and Fuel. Remove oil tank dipstick and wipe it with a clean cloth. Replace and retighten the dipstick.Remove the dipstick again and check the oil level. It should be at the top of the full indicator on the dipstick. If low, add oil slowly into the oil tank. After adding oil, wait one minute and then recheck the oil level.
Precautions: Failure to fill engine with oil before starting engine will result in permanent damage: Always check the oil level before starting the engine, making sure the pressure washer is on a level surface; Always use oil type SAE 10W-30. Stopping Engine) and let it cool at least two minutes before removing the fuel tank cap. Clean the fuel cap area of dirt and debris. Remove the fuel tank cap and make sure the fuel filter is in place.
Fill the fuel tank with fuel. Never overfill the fuel tank.
Fill tank to no more than ½ (13 mm) below the bottom of the filler neck to provide space for expansion caused by the engine heat. Replace the fuel tank cap. 1Check engine oil level; fill to recommended level if necessary. Check gasoline level fill if necessary. This pressure washer comes with a pump quick connect coupling.It allows you to quickly connect or disconnect the garden hose from the pump. Pulling the mid ring will disconnect the quick connect coupling. Connect garden hose to the pump quick connect coupling and TURN WATER ON. The water supply must provide a minimum of 4 GPM at 20 PSI or the pump may be damaged. This will allow air to escape from the hose in order to prime the pump.
Squeeze trigger until there is a steady flow of water. Turn engine switch to the "On" position. Open fuel valve ("On" position). Close the Choke lever by moving the lever to the "CLOSE" position. Locate recoil cord and pull slowly until resistance is felt.
At this oint, pull rapidly to start engine. Once engine starts, moving the lever to the "Open" position. After turning off the machine, wait for 20 minutes to prevent plastic parts from being burned by muffler, then fold the handle. Try to use up the fuel before storage. Remove the hex screw from the carburetor.
Drain the fuel from the tank, carburetor, and hose. Screw the carburetor drain hex screw back once the fuel has been completely drained.If you do not wish to drain the fuel tank, add a fuel stabilizer into the fuel tank. Run the engine at least five minutes after adding the tabilizer to distribute it inside the fuel system.